Logo IIMPI

Publicaciones

 Publicaciones de Libros y Revistas Internacionales 

  3     h     e

2024

Bibiloni, S., Irimescu, A., Martinez-Boggio, S., Merola, S. & Curto-Risso, P. (2024). Mild Hybrid Powertrain for Mitigating Loss of Volumetric Efficiency and Improving Fuel Economy of Gasoline Vehicles Converted to Hydrogen Fueling. Machines, 12(355). https://doi.org/10.3390/machines12060355

Dias, F.J., Lacava, P., Curto, P., Penaranda, A., Martinez, S., Weissinger, F.,  Martelli, A. & Santos, L. (2024).  Decarbonizing Light Vehicles with Hydrous Ethanol: Performance Analysis of a Range-Extended PHEV Using Experimental and Simulation Techniques. SAE Technical Paper. https://doi.org/10.4271/2024-01-2161

Gervaz, S. & Favre, F. (2024). Identifying Key Parameters in Building Energy Models: Sensitivity Analysis Applied to Residential Typologies. Buildings, 14. https://doi.org/10.3390/ buildings14092804

Ghazarian, A., Galione, P. & Curto, P. (2024). Concentrated Solar Power Techno-Economic Analysis in Humid Subtropical South America: The Uruguayan Case. ASME Journal of Solar Energy Engineering, 147(1). https://doi.org/10.1115/1.4065388

Gonzalez, J.C., Simões, G., Bernini, R.B., Coutinho, L.H., Nunez, C.V., Ferreira, C.S. & de Souza, G. (2024). Application of X-ray Spectroscopic Techniques to Determine the Inorganic Composition and Sulfur Chemical Speciation of the Amazonian Plant Bixa orellana. Appl. Sci, 14. https://doi.org/10.3390/app14177827

Martinez-Boggio, S, Teixeira Lacava, P, Solferini de Carvalho, F & Curto-Risso, P. (2024.). Combustion diagnosis in a spark-ignition engine fueled with syngas at different CO/H2 and diluent ratios. Gases, 4, pp. 97–116. https://doi.org/10.3390/gases4020006

Urquiola, A.,  Galione, P.A., Curto-Risso, P.L. (2024). Effect of convective and radiative heat transfer in evaporative losses during beef coolingEffet du transfert de chaleur convectif et radiatif sur les pertes par évaporation pendant le refroidissement de la viande bovine. International Journal of Refrigeration, 161(2024), 1-11. https://doi.org/10.1016/j.ijrefrig.2024.01.029

Wener, N., Martinez-Boggio, S., Favre, F. & Curto-Risso, P. (2024). Zero-dimensional model of a pumped heat energy storage system with reciprocating machines. Applied Energy, 372.https://doi.org/10.1016/j.apenergy.2024.123764

2023

Curto-Risso, P., Martinez-Boggio, S., Monsalve-Serrano, J. & García, A. (2023). High Degree of Electrification in Heavy-Duty Vehicles. Energies, 16(8), 1-20. https://doi.org/10.3390/en16083565

Fernández, M.V.; Figueredo, H.; Rivera, J.L.V.; Rodríguez, F.P.; Abreu, M.E.F.; Diaz, F.R.V.; Soto, A.R.; Alvarez, A.A.; Quinteros, R. y Ketterer, C.G. (2023). Mechanical Characterization of a Polymer/Natural Fibers/Bentonite Composite Material with Implementation of a Continuous Damage Model. Appl. Sci.13. https://doi.org/10.3390/app13042677

Martinez-Boggio, S., Irimescu, A., Curto-Risso, P., & Merola, S. (2023). Assessment of a Second Life City Vehicle Refurbished to Include Hybrid Powertrain Technology. Machines, 11(7), 699. https://doi.org/10.3390/machines11070699

Martinez-Boggio, S., Merola, S., Curto-Risso, P., Vaglieco, B. & Irimescu, A. (2023).  Conversion of a Small Size Passenger Car to Hydrogen Fueling: Focus on Vehicle Dynamics and ECU Remapping Requirements. SAE International. https://doi.org/10.4271/2023-24-0065

Pena, G y Curto-Risso, P. (2023.). Disponibilidad de rastrojos y su potencial energético en Uruguay. Revista de Energía de Latinoamérica y el Caribe, 7 (1,) pp. 74-94. https://enerlac.olade.org/index.php/ENERLAC/article/view/237

Vanzulli, M.C. & Pérez Zerpa, J.M. (2023). A co-rotational formulation for quasi-steady aerodynamic nonlinear analysis of frame structures. Heliyon, 9(9). https://doi.org/10.1016/j.heliyon.2023.e19990

2022

Curto-Risso, P., Favre, F. & Salomone-González, D. (2022). Modeling of heat leak effect in round trip efficiency for Brayton pumped heat energy storage with liquid media, by cooling and heating of the reservoirs tanks.  Journal of Energy Storage, 46.  https://doi.org/10.1016/j.est.2021.103793

Curto-Risso, P., Calvo, A.; Medina , A., Roco , J. & González-Ayala, J.  (2022). Pumped heat energy storage with liquid media: Thermodynamic assessment by a transcritical Rankinelike model. Journal of Energy Storage, 56, 1-14. https://doi.org/10.1016/j.est.2022.105966

Díaz-Cuadro, C., Figueredo, H. & Santos, D. (2022). Computational analysis of the anterior cruciate ligament reconstruction under different graft configurations.  Research on Biomedical Engineering, 38, 913–929.  https://doi.org/10.1007/s42600-022-00227-x

Figueredo, H. , Valin, J.L., Gonçalves, E., Vinicius, P., Milito, G., Perez, J.O., Palacios, G.F.,  Fernández, M., Araújo, F., Garcia del Pino, G. & Rodriguez, A. (2022). The Restored Premolars Biomechanical Behavior: FEM and Experimental Moiré Analyses. Applied Sciences,12(13),2-14. https://doi.org/10.3390/app12136768

Figueredo, H. , Gonçalves, E. , Valin, J. & Ide, L. (2021) Analysis of the Influence of Parafunctional Loads on the Bone-Prosthesis System: A Non-Linear Finite Element Analysis. Journal of Biomedical Science and Engineering, 14, 223-232. 10.4236/jbise.2021.146019.

Machín,  S., Blasina, F., Echarri, A., Farber, G., Molina, F. & Pérez, N. (2022). Implementación y Evaluación de un Dispositivo de Simulación de Impactos de Granizo. Ingenieria, 23, 135-150. https://doi.org/10.36561/ING.23.11

Vanzulli, M. & Pérez, J. (2022). A consistent co-rotational formulation for aerodynamic nonlinear analysis of flexible frame structures.   https://arxiv.org/abs/2204.10545

2021

Curto-Risso, P., Calvo, A., Medina , A., Roco , J.; González-Ayala, J. & Salomone-González, D. (2021). Multicriteria optimization of Brayton-like pumped thermal electricity storage with liquid media. Journal of Energy Storage,  44, 1-15. https://doi.org/10.1016/j.est.2021.103242

Figueredo, H., Gonçalves, E., Valin, J. & Ide, L. (2021). Analysis of the Influence of Parafunctional Loads on the Bone-Prosthesis System: A Non-Linear Finite Element Analysis. Journal of Biomedical Science and Engineering, 14, 223-232. 10.4236/jbise.2021.146019

Pena-Vergara, G, Castro, L, Gasparetto, C & Bizzo, W. (2021.). Energy from planted forest and its residues characterization in Brazil. Energy. 239. https://doi.org/10.1016/j.energy.2021.122243

2020

Curto-Risso, P. y Navarrete, G. (2020). Modelo numérico simple de la combustión de un tronco de madera cilíndrico. ENERLAC : Revista de Energía de Latinoamérica y el Caribe, 4(1),118-131. https://enerlac.olade.org/index.php/ENERLAC/article/view/118

Curto-Risso, P., Calvo, A., Medina , A., Roco , J., González-Ayala, J. & Salomone-González, D.  (2020). Pumped heat energy storage with liquid media: Thermodynamic assessment by a Brayton-like model. Energy Conversion and Management, 226. https://doi.org/10.1016/j.enconman.2020.113540

González, F., Gutiérrez, A. & Galione, P. (2020).  Computational fluid dynamics study of Savonius rotors using OpenFOAM. Wind Engineering, 1(18). https://doi.org/10.1177/0309524X20924958

2019

 Favre, F., Antepara, O., Olieta, O., Lehmkuhl, O.;Perez-Segarra, C. (2019). An immersed boundary method to conjugate heat transfer problems in complex geometries. Application to an automotive antenna Applied. Thermal Engineering ,148, 907-928. https://doi.org/10.1016/j.applthermaleng.2018.11.099

Martinez, S., Merola., S., Texeira P.,Irimescu, A. & Curto-Risso, P. (2019). Effect of Fuel and Air Dilution on Syngas Combustion in an Optical SI Engine. Energies,12(8). https://doi.org/10.3390/en12081566

Martinez, S.; Merola., S. & Irimescu, A. (2019). Flame Front and Burned Gas Characteristics for Different Split Injection Ratios and Phasing in anOptical GDI Engine. Appl. Sci, 9(3). https://doi.org/10.3390/app9030449

2018

Bartrons, E., Galione, P. & Pérez-Segarra, C. (2018). Fixed grid numerical modelling of frost growth and densification.  International Journal of Heat and Mass Transfer, 130, 215 - 229. https://doi.org/10.1016/j.ijheatmasstransfer.2018.10.080

Favre, F., Antepara, O., Schillaci, E.; Balcázar, N. & Asensi, O. (2018). Numerical study of an impulse wave generated by a sliding mass. International Journal of Computational Methods and Experimental Measurements,  6(1) , 98 - 109. 10.2495/CMEM-V6-N1-98-109

Favre, F.;  Gutierrez, E, Bálcaza. N., Amani, A. & Rigola, J. (2018). Numerical approach to study bubbles and drops evolving through complex geometries by using a level set - moving mesh - immersed boundary method. Chemical Engineering Journal, 349. https://doi.org/10.1016/j.cej.2018.05.110

Favre, F.,  Gutierrez, E., Bálcaza N. & Rigola, J.  (2018). On the solution of the problem of a drop falling against a plane by using a level set - moving mesh - immersed voundary method. International Journal of Computational Methods and Experimental Measurements, 6(1), 208 - 219. 10.2495/CMEM-V6-N1-208-219

Martinez, S., Lacava, P., Curto, P.L., Irimescu, A., Merola. (2018). Effect of Hydrogen Enrichment on Flame Morphology and Combustion Evolution in a SI Engine Under Lean Burn Conditions, SAE Technical Paper.  doi:10.4271/2018-01-1144 

Pena, G., Durante, A. y Curto-Risso, P.  (2018).Aprovechamiento energético de residuos agrarios en Uruguay. ENERLAC Revista de Energía de Latinoamérica y el Caribe, 2(1), 1-17. https://enerlac.olade.org/index.php/ENERLAC/article/view/58/28

Reyes-Ramírez, I., Martínez-Boggio, S., Curto-Risso, P., Medina, A., Calvo Hernández, A., & Guzmán-Vargas, L. (2018). Symbolic Analysis of the Cycle-to-Cycle Variability of a Gasoline–Hydrogen Fueled Spark Engine Model. Energies, 11(4), 968. https://doi.org/10.3390/en11040968

2017

Durante, A., Pena-Vergara, G., Curto-Risso, P.,  Medina, A. & Calvo Hernández, A. (2017). Thermodynamic simulation of a multi-step externally fired gas turbine powered by biomass. Energy Conversion and Management, 140, 182-191.  https://doi.org/10.1016/j.enconman.2017.02.050

Martinez-Boggio, S., Curto-Risso, P., Merola, P., Irimescu, S. & Lacava, P. (2017). Flame Front Propagation in an Optical GDI Engine under Stoichiometric and Lean Burn Conditions.  Energies, 10(9). https://doi.org/10.3390/en10091337

Navarrete, G., Curto-Risso, P., & Bizzo, w. (2017). Simplified model and simulation of biomass particle suspension combustion in one-dimensional flow applied to bagasse boilers. Biomass and Bioenergy, 99, 38-48. https://doi.org/10.1016/j.biombioe.2017.01.030

Urquiola, A., Alvarez, G. &Flick, D. (2017).Frost formation modeling during the storage of frozen vegetables exposed to temperature fluctuations. Journal of Food Engineering, 214, 16-28. https://doi.org/10.1016/j.jfoodeng.2017.06.025

2016

Favre, F., Colomer, G., Lehmkuhl, O. & Oliva, A. (2016). Numerical simulations of conjugate convection combined with surface thermal radiation using an Immersed-Boundary Method. Journal of Physics Conference Series. https://doi-org.proxy.timbo.org.uy:88/10.1088/1742

Golpe, A. (2016). La Gestión del Conocimiento como parte integrante del Gerenciamiento Estratégico de Costos. Revista Iberoamericana de Contabilidad de Gestión, 14(28), 1- 17. http://www.observatorio-iberoamericano.org/RICG/n_28/ana_golpe.pdf

Martinez-Boggio, S., Curto-Risso, P., Medina, A. & Calvo, A. (2016). Quasi-dimensional Modeling of Cyclic Variability in Gasoline-Hydrogen Spark Engines. International Journal of Applied Thermodynamics, 19(2), 92-100. 10.5541/ijot.5000155476

Martinez-Boggio, S., Curto-Risso, P., Medina, A. & Calvo, A. (2016). Simulation of cycle-to-cycle variations on spark ignition engines fueled with gasoline-hydrogen blends. International Journal of Hydrogen Energy, 41(21), 9087-9099. https://doi.org/10.1016/j.ijhydene.2016.03.120

2015

Galione, P., Lehmkuhl, O., Rigola, J. & Oliva, A. (2015). Fixed­-grid numerical modeling of melting and solidification using variable thermo-physical properties —Application to the melting of n­Octadecane inside a spherical capsule. International Journal of Heat and Mass Transfer, 86, 721-743. https://doi.org/10.1016/j.ijheatmasstransfer.2015.03.033

Galione, P., Pérez-Segarra, C., Rodríguez, I., Torras,S. & Rigola, J. (2015). Multilayered solid-PCM thermocline thermal storage for CSP. Numerical evaluation of its application in a 50MWe plant. Solar Energy, 119, 134 - 150. https://doi.org/10.1016/j.solener.2015.06.029

Galione, P., Pérez-Segarra, C., Rodríguez, I., Torras,S. & Rigola, J. (2015). Multi­layered solid­PCM thermocline thermal storage concept for CSP plants. Numerical analysis and perspectives. Applied. Energy, 142, 337-351. https://doi.org/10.1016/j.apenergy.2014.12.084

Hunicz, J., Medina, A., Litak, G., Curto-Risso, P. & Guzmán-Vargas, L (2015). Effects of Direct Fuel Injection Strategies on Cycle-by-Cycle Variability in a Gasoline Homogeneous Charge Compression Ignition Engine: Sample Entropy Analysis. Entropy, 17(2), 539 - 559. https://doi.org/10.3390/e17020539 

2014

Galione, P., Lehmkuhl, O., Rigola, J. & Oliva, A. (2014). Fixed ­Grid Modelling of Solid­Liquid Phase Change in Unstructured Meshes Using Explicit Time Schemes. Numerical Heat Transfer, Part B: Fundamentals, 65, 27-52. https://doi.org/10.1080/10407790.2013.836399

Sen, A., Curto-Risso, P., Medina, A.. & Calvo Hernández, A. (2014). Effect of ethanol addition on cyclic variability in a simulated spark ignition gasoline engine. Meccanica.  Meccanica, 49, 2285–2297. https://doi.org/10.1007/s11012-014-9974-1

2013

Curto-Risso, P.,  Medina, A., Calvo Hernández, A., Guzmán-Vargas, L. & Angulo-Brown, F. (2013). Fluctuations in the Energetic Properties of a Spark-Ignition Engine Model with Variability. Entropy, 15, 3277-3296. https://doi.org/10.3390/e15083367

Davoine, F., Galione, P., Ramos, J., Leinen, D., Martín, F., Dalchiele, E. & Marotti, R. (2013). Modeling of gradient index solar selective surfaces for solar thermal applications. Solar Energy, 91,316 - 326. https://doi.org/10.1016/j.solener.2012.09.019

Golpe, A. (2013). El gerenciamiento estratégico de costos y la cadena de valor en la época digital. Revista Costos y Gestión de IAPUCO. https://revistaiic.org/

 

Medina, A., Curto-Risso, P. L., Hernández, A. C., Guzmán-Vargas, L., Angulo-Brown, F., & Sen, A. K. (2014). Quasi-dimensional simulation of spark ignition engines: From thermodynamic optimization to cyclic variability. Springer-Verlag London Ltd. https://doi.org/10.1007/978-1-4471-5289-7

Based on the simulations developed in research groups over the past years, Introduction to Quasi-dimensional Simulation of Spark Ignition Engines provides a compilation of the main ingredients necessary to build up a quasi-dimensional computer simulation scheme. Quasi-dimensional computer simulation of spark ignition engines is a powerful but affordable tool which obtains realistic estimations of a wide variety of variables for a simulated engine keeping insight the basic physical and chemical processes involved in the real evolution of an automotive engine. With low computational costs, it can optimize the design and operation of spark ignition engines as well as it allows to analyze cycle-to-cycle fluctuations.

2012

Pittaluga, L., &  Snoeck, M. (2012). Animal vaccines in Uruguay: A truncated discovery process. En: Sabel, C., Fernández-Arias, E., Hausmann, R., Rodríguez-Clare, A., Stein, E. (Eds.) (2012), Export Pioneers in Latin America (pp. 271-294).  http://idbdocs.iadb.org/wsdocs/getdocument.aspx?docnum=36803174

Snoeck, M. & Pittaluga, L. (2012). Software Discovery in Uruguay: Public-Private Solutions to Coordination Failures.  En: Sabel, C., Fernández-Arias, E., Hausmann, R., Rodríguez-Clare, A., Stein, E. (Eds.), Export Pioneers in Latin America (pp. 239-270). David Rockefeller Center for Latin American Studie. http://idbdocs.iadb.org/wsdocs/getdocument.aspx?docnum=36803174

Why do some new export activities succeed while others do not? Why are some not even attempted? In this book, distinguished research teams analyze eleven cases of new export endeavors in six Latin American countries to learn how export pioneers are born and jump-start a virtuous process leading to economic transformation. The case studies range from blueberries in Argentina and fresh cut flowers in Colombia to aircraft in Brazil and software in Uruguay. 

2011

Amorena, M. (2011). Modelo de Integración de Sistemas de Gestión. Universidad de León.

Curto-Risso, P., Medina, A. & Calvo Hernández, A. (2011). Optimizing the geometrical parameters of a spark ignition engine: simulation and theoretical tools. Applied Thermal Engineering, 31(5), 803-810. http://dx.doi.org/10.1016/j.applthermaleng.2010.10.029

Medina, A., Curto-Risso, P. L., Hernández, A. C., Guzmán-Vargas, L. & Angulo-Brown, F. (2011). On cycle-to-cycle heat release variations in a simulated spark ignition heat engine. Applied Energy, 88 ,1557-1567. http://dx.doi.org/10.1016/j.apenergy.2010.11.030

2010

Medina, A., Curto-Risso, P. L., Hernández, A. C., Guzmán-Vargas, L. & Angulo-Brown, F. (2010). Monofractal andmultifractal analysis of simulated heat release fluctuations in a spark ignition heat engine. Physica A - Statistical and Theoretical Physics, 389 (24) ,5662-5670. http://dx.doi.org/10.1016/j.physa.2010.08.024

Galione, P., Baroni, A., Ramos, J., Leinen, D., Martin, F., Marotti, R & Dalchiele, E. (2010). Origin of solarthermal selectivity and interference effects in nickel-alumina nanostructured films, Surf. & Coat. Tech., 204, 2197-2201.

Rivas, S., Perondi, E., Roland, M &  Sobrinho, S. (2010). Adaptive controlfor an active suspensiòn of an elevator. ABCM Symposium Series in Mechatronics, 4. 

2009

Curto-Risso, P., Medina, A. & Calvo Hernández, A.  (2009). Optimizing the operation of a spark ignition engine: Simulationand theoretical tools. Journal of Applied Physics, 105.

Silveira,L. y Gazzano, M. (2009). Introducción a la Calidad Total. Lapsus Ltda.